Anodized Aluminum Nameplate Printing Aluminum Tags

This Aluminium Logo Label developed by Minghong adopts composite surface molding technology, combining matte frosted dark base panel and raised bright silver metallic trademarks to build a strong layered visual effect for brand identity. Different from punched fixed metal badges and flat printed aluminium stickers we previously manufactured, this product uses integral aluminum substrate cold forging to form protruding three-dimensional text patterns, matched with imported original 3M double-sided foam adhesive on the back for tool-free sticking installation. The rectangular rounded-corner structure effectively avoids edge scratch damage during product assembly and daily use. All surface coloring and electroplating processes are finished in our self-owned electroplating production lines, with each finished product passing anti-adhesion, wear resistance and aging resistance sampling detection to meet long-term indoor commercial equipment branding application standards.

Specifications

Differentiated Product Strengths

1. Visual Hierarchy Upgraded by Two-Tone Separation Design

The product separates the background base plate and brand text into two completely different texture systems: the dark matte granular bottom eliminates surface fingerprint traces, while the electroplated silver three-dimensional words highlight brand recognition instantly under light irradiation. This high-end color matching method is widely favored by mid-to-high end appliance and electronic brand manufacturers, helping customers upgrade product appearance grades with low-cost brand label configuration.

2. Original 3M Adhesive Solves Long-Term Falling Off Pain Points

We directly laminate authentic 3M foam adhesive on the back of aluminium labels during the factory production process, instead of letting customers purchase adhesive for secondary pasting. The foam layer has good fitting performance for slightly curved surfaces of equipment shells, forming uniform stress paste without hollowing or warping. The adhesive has excellent anti-aging performance and will not degum or lose viscosity after long-term use inside closed equipment casings.

3. Closed-loop In-house Production Controls Every Processing Link

Located in Longgang Wenzhou, China’s core label industrial cluster area, Minghong owns independent mold processing workshop, aluminium stamping workshop, four standard electroplating production lines and matched environmental waste recovery facilities. All procedures from sheet cutting, mold carving, three-dimensional embossing, surface painting, electroplating character treatment to 3M adhesive compounding are completed internally, without outsourcing external processing. This closed production mode greatly shortens order delivery cycles and unifies the consistency of batch product appearance.

4. Professional Team Builds Stable Quality Control Barriers

Our company is equipped with 30 full-time R&D engineers dedicated to optimizing aluminium stamping precision and coating formula matching, and 15 professional QC inspectors implement multi-point inspection in incoming materials, semi-finished products and finished product delivery links. More than 200 frontline skilled workers cooperate with automated production equipment to support stable supply of large bulk orders within our 6000 square meters standardized factory building. The ISO9001 quality system obtained in 2007 has been running stably for many years to standardize each production operation specification.

5. Export Verified Packaging & Global Market Delivery Experience

Our Aluminium Logo Labe have been exported to the United States, Germany, Russia, India, South Korea, Japan and multiple global markets for a long time. We adopt anti-collision partition packaging for finished aluminium badges to prevent raised silver characters from being scratched during ocean transportation. The business team is familiar with export documents, commodity inspection and customs clearance requirements of various countries, reducing customers’ overseas receiving obstacles.

Suitable Application Scenarios for Two-Tone 3D Aluminium Logo Labels

Built-in kitchen appliances, ovens, range hoods, water dispensers and small household electrical equipment exterior branding

Smart electronic equipment shells, audio equipment, power adapters and charging cabinet identification marks

High-end customized wooden cabinets, metal storage lockers, bathroom cabinet door brand nameplates

Office equipment, printers, disinfection equipment and commercial public facility brand logos

Metal casings of automotive interior accessories, modified parts and vehicle-mounted electronic products

Standard Step-by-Step Installation Guide for 3M Adhesive Aluminium Labels

Surface Preparation: Wipe the target pasting area with alcohol cotton cloth to remove oil film, dust and residual sundries, and place it to dry completely.

Position Calibration: Align the aluminium logo label with the preset marking position on the product surface to confirm the placement angle and horizontal level.

Release Paper Peeling: Tear off a small section of the 3M white release paper from one corner, keep the main body of the label temporarily attached to avoid deviation.

Laminating & Pressing: Slowly peel off the entire release paper, attach the aluminium badge to the surface evenly, then apply continuous uniform pressure on the whole badge surface for 40~60 seconds.

Curing Period: Avoid squeezing, pulling or washing the label within 24 hours after pasting, so that the 3M adhesive can reach the optimal bonding strength.

FAQ

Q1: Can Minghong customize exclusive two-tone color collocation for my brand logo aluminium labels?

A: We support independent customization of base plate paint color and raised character electroplating color. You only need to provide color samples or international color card parameters, our R&D department will adjust spraying and electroplating formulas to match your brand visual standards.

Q2: Will the silver electroplated three-dimensional characters wear off after long-term friction?

A: The raised characters adopt thick-layer electroplating plus surface sealing treatment. Conventional daily contact friction will not cause electroplating layer peeling. For products with frequent surface friction, we can strengthen the electroplating thickness for customization.

Q3: What is the MOQ for custom aluminum logo labels with 3M adhesive back?

A: We accept small-batch sample orders for brand testing and large-volume bulk wholesale orders simultaneously. The mold opening cost and MOQ standard vary according to whether the outline is a common shape or a special custom shape, contact our sales staff for targeted quotations with your drawings.

Q4: Can the aluminium label adapt to slightly curved equipment shell surfaces for pasting?

A: Matched with elastic foam 3M adhesive, the aluminium thin plate itself has mild flexibility, which can fit slightly curved smooth surfaces well. It is not applicable for surfaces with large radian deformation and rough porous structures.

Q5: What other back adhesive options can be provided besides original 3M adhesive?

A: On the premise of meeting customer cost demands, we can also provide domestic high-viscosity foam adhesive alternatives, but original imported 3M adhesive is still the preferred solution for long-term stable use of exported products.

Q6: What factory qualification certificates can be provided for customs clearance of exported aluminium labels?

A: Our factory holds valid ISO9001 quality management system certification documents, complete environmental protection production qualification reports and factory registration materials, which can meet the commodity inspection and customs declaration needs of most countries and regions around the world.

Q7: How long is the overall production lead time for customized aluminium logo label orders?

A: For products using existing molds, mass production can be completed within 7 working days after sample confirmation. For new mold development projects, the whole process from mold making, sample proofing to mass delivery is controlled within 13 working days. We support priority scheduling for urgent orders through prior communication.

Minghong Factory & Brand Authentic Introduction

Wenzhou Minghong Electroplating Technology Co., Ltd takes Longgang Wenzhou, the iconic gathering place of China’s label manufacturing industry, as its production base. After years of operation accumulation, the company has built a full industrial chain covering independent mold development, metal stamping forming, professional electroplating surface treatment, surface coating processing and standardized finished product packaging. Supported by four complete electroplating assembly lines and matched environmental recycling processing equipment, the whole production process realizes internal self-control of pollution discharge to meet global green export production requirements. Covering a total plant area of 6000 square meters, with hierarchical configuration of R&D, quality inspection and production posts, the company relies on more than 200 on-site employees to realize stable monthly delivery capacity of 5 million pieces of all types of metal and aluminium labels. We always regard stable product quality and responsive global after-sales service as the core foothold of enterprise development, keep optimizing aluminium label molding technology and adhesive composite technology year by year, and provide reliable personalized brand marking solutions for equipment manufacturers, home appliance brands, hardware factories and global import traders.

Daily Maintenance & Protection Suggestions for Aluminium Logo LabelsUse soft microfiber cloth dipped in neutral detergent to wipe dust and stains on the label surface. Do not scrape the raised silver characters with sharp hard objects to prevent scratches on the electroplated layer. Avoid long-term soaking of the aluminium badge in strong acid and strong alkali liquid environments to protect the surface coating and adhesive performance.