3D Metal Nickel Label

The China 3D Metal Nickel Label of Minghong has a very thin and soft overall thickness. It can be slightly bent to fit the curved surface. The back is completely covered with high-adhesive waterproof foam rubber. The surface of the foam rubber is precisely cut to follow the rectangular shape. It can be easily pasted for construction by removing the isolation paper. No holes need to be drilled or screws fixed. The length and width of the rectangle can be freely adjusted. Besides the vehicle body modification labels, it can also be used for helmets, travel bags, retro motorcycle interiors, outdoor equipment shells, and brand LOGOs. You can simply design the graphics and color as you like to have the mold customized.

Correct Usage Method

Before pasting, wipe the base surface clean to remove car wax, oil stains and dust. Ensure the surface is completely dry and free of moisture. Avoid local delamination in the later stage.

Align and position the 3D Metal Nickel Label accurately, and place it steadily. Use your palm to evenly press the entire label, maintaining the pressure for 3 minutes, allowing the adhesive layer to fully and tightly adhere to the shell.

If pasting on an arc-shaped shell, press slowly along the arc shape without forcibly pulling the nickel material to prevent creasing on the metal surface.

After pasting, let it stand for 24 hours. Wait until the adhesive layer is fully cured before performing operations such as washing the car or exposing to rain and contact with water.

When removing the label, slowly and evenly lift it from the edge. Do not forcefully pry it; avoid breaking the nickel characters and reduce the residue of leftover adhesive on the paint surface.

Daily maintenance methods

Daily cleaning of 3D Metal Nickel Labels: Use only water and a soft towel for wiping. Do not use asphalt cleaners, strong acid or alkali car washing fluids. These chemicals will corrode the filling paint layer, causing the color to fade.

Avoid using hard steel wire balls or sandpaper to rub the raised characters to prevent scratching the metal shiny surface and damaging the surface protection structure.

For vehicles parked outdoors for a long time, rinse the label gaps once every half month to prevent sand and mud from getting stuck in the character grooves and being repeatedly rubbed and worn down the paint.

In coastal areas with high salt spray, regularly rinse the surface with water to delay the oxidation and blackening of the metal edges and maintain the label's long-term brightness and cleanliness.

If the edges come off and lift up, promptly repress and adhere them to prevent rain from seeping in through the gaps and causing the internal graphics to get damp and change color.

User Purchase Review

Vintage Motorcycle Modeller: The 3D Metal Nickel Label multi-color separation is executed very well. The three-color lines are straight and clean, with no color bleeding or mixing. The ultra-thin nickel label can be attached to the curved side panel without bulging or warping like hard plastic labels. The packaging quality is almost the same as the original factory parts from overseas, and the repeat purchase orders are very stable.

Cross-border Auto Parts E-commerce Seller: The entire batch of goods has a unified color, with uniform black background and no dirt spots on the white characters. The flexible nickel material is packed independently, and it is almost not deformed during long-distance shipping. Overseas buyers can easily attach it themselves, and there are few after-sales disputes. Long-term stock preparation is very reassuring.

Leather Goods Processing Factory Purchaser: Used for the LOGO of travel cases, the ultra-thin material fits the leather curved surface very smoothly, and the raised characters are wear-resistant. Even after repeated friction, the graphics and text will not be worn off. Small batches of dozens of pieces can also be quickly prototyped, and the efficiency of changing characters and graphics is very high.

Private Modified Car Owner: Attached to the tailgate of the scooter, the back adhesive has an appropriate viscosity. It has not wrinkled or warped after being exposed to wind and rain for half a year. When removing it, it can be slowly lifted. There is almost no residual adhesive on the car paint, and it will not damage the original car paint coating. The cost performance is very high.