3D Plastic Logo

When Minghong Factory was manufacturing this 3D Plastic Logo, they first applied a vacuum chrome coating on the surface as a base layer, and then applied a baked paint color to the color block areas. The boundaries of the four colors (yellow, black, red, and blue) are clear and regular, and there will be no problem of color bleeding or mixing. The depth of the character recess is uniform, and the filling paint is full and flat. On the back of the sign, a thick and water-resistant double-sided adhesive is completely reattached. The adhesive layer is precisely formed according to the two separate shape die-cutting, and it can be directly pasted by removing the release paper without the need for punching holes or screw fixation.

Customized Services

In addition to the original vehicle chrome finish, various exterior finishes such as all-black lacquer, matte gun gray, etc. can also be customized. It can be made into a complete two-piece set for matching, or it can be sold separately. It is suitable for both retail sales of auto parts modification and bulk orders for export.

Application scenarios

1. Private car exterior modification: Applied to the door fenders, rear doors, and grille positions, replacing the original ordinary logos to enhance the appearance recognition of sports models. It is a common accessory for upgrading the appearance of performance vehicles.

2. Offline auto modification stores: This 3D Plastic Logo is used as a supporting accessory for vehicle upgrades. The split two-piece design allows for free arrangement of the sticking position. The style is in line with the original vehicle style, and the restoration degree after installation is very high.

3. Cross-border auto parts e-commerce: Independently packaged in separate parts, it is less likely to be crushed or bumped during transportation. The back adhesive is firmly attached. Overseas buyers can do DIY sticking themselves, significantly reducing the problem of after-sales returns and exchanges.

4. Used car refurbishment and renovation: Used to replace old and faded, or peeling paint marks on old cars. It is a low-cost way to restore the original factory exquisite appearance of the vehicle.

5. Automotive peripheral culture and creative: Cut and pasted on the surface of luggage, helmets, and vehicle storage boxes as brand decoration stickers.

Actual performance test

Weathering aging test: The 3D Plastic Logo was placed in the UV aging test chamber and exposed to continuous sunlight for hundreds of hours. The chrome layer did not peel off, the colored paint did not turn white and fade, and the edges of the color blocks did not crack or fall off.

Bonding strength test: The vehicle logo was adhered to the painted steel plate. After high and low temperature cycling tests and repeated high-pressure water jet rinsing, the edges did notBend up or peel off, and the back adhesive still firmly adhered to the paint surface.

Salt spray corrosion test: Simulating the humid salt spray environment in coastal areas and continuously spraying, the plastic substrate and the electroplated layer were closely bonded. After a long-term test, no oxidation blackening or coating peeling occurred.

Vehicle installation real car bump test: Adhered to the vehicle's fender, after continuous long-distance driving of thousands of kilometers, passing through rough roads and bouncing vibrations, the split logo did not shift or curl, and the adhesion flatness remained stable.

Disassembly residual adhesive test: After half a month of standing, slowly peel off the signboard. The adhesive layer breaks and separates, and there will be no thick stubborn black adhesive remaining on the vehicle paint surface, nor will it damage the original vehicle paint surface.

FAQ

Q: Can the two separate labels be purchased separately?

A: They can be sold separately. The shield-shaped label and the letter label can be ordered separately to meet different application schemes.

Q: Will the colored painted areas have color bleeding or smudging?

A: The color-blocking process uses color separation masking, so the boundaries are straight and clear, and there will be no color bleeding.

Q: Can the label be adhered flat to the curved car door without warping?

A: The base material has moderate toughness, and when combined with a fully formed foam adhesive, it can fit the car's curvature, and the edges are less likely to bend up.

Q: Can it be changed to a full black matte version?

A: 3D Plastic Logo supports various surface finishes such as bright black, matte black, and chrome, and the color can be customized as needed.

Q: Will the car logo be washed off by a high-pressure water gun after installation?

A: After high-pressure water flushing tests, normal car washing will not cause the label to come off or fall off.

Q: Are the fonts and patterns strictly in accordance with the original car style?

A: The original data is molded, and the size, curvature, character depth, and original factory are kept highly consistent.

Q: Can a small batch of dozens of pieces be prototyped first before mass production?

A: Prototyping based on the provided design is supported. After confirming the color and pattern, mass production can be arranged.